top of page

TGR Website Search Bar

Search this site

39 results found with an empty search

  • RAINWATER HARVESTING | TrinityGlenRoseGCD

    Take advantage of the Trinity Glen Rose District's conservation program incentives. RAINWATER HARVESTING Rainwater harvesting is the capture, diversion, and storage of rainwater for a number of different purposes including landscape irrigation, drinking and domestic use, aquifer recharge, and stormwater abatement. In a residential or small-scale application, rainwater harvesting can be as simple as channeling rain running off an unguttered roof to a planted landscape area via contoured landscape. To prevent erosion on sloped surfaces, a bermed concave holding area down slope can store water for direct use by turfgrass or plants. More complex systems include gutters, pipes, storage tanks or cisterns, filtering, pump(s), and water treatment for potable use. Rainwater Harvesting Q&A Just hover your cursor over the photo to see the answer for each question. What are the basic parts of a rainwater harvesting system? Catchment surface: the collection surface from which rainfall runs off, typically a roof on a home or building Gutters and downspouts: channel water from the roof to the tank Leaf screens, first-flush diverters, and roof washers: components which remove debris and dust from the captured rainwater before it goes to the tank One or more storage tanks, also called cisterns Delivery system: gravity-fed or pumped to the end use Treatment/purification: for potable systems, filters and other methods to make the water safe to drink What are the benefits a rainwater harvesting system? The water is free; the only cost is for collection and use. Rainwater provides a water source when groundwater is unavailable, or it can augment limited groundwater supplies. The zero hardness of rainwater helps prevent scale on appliances, extending their use. Rainwater is superior for landscape irrigation. Rainwater harvesting reduces flow to stormwater drains and also reduces non-point source pollution. Rainwater harvesting reduces consumers’ utility bills. How much water can I capture? The basic rule for sizing any harvesting system is that the volume of rainwater is that can be captured (the supply) must equal or exceed the volume of water used (the demand). In theory, approximately 0.62 gallons per square foot of collection surface per inch of rainfall can be collected. In practice, however, some rainwater is lost to first flush, evaporation, splash-out overshoot from the gutters in hard rains and small leaks. How do I get started with a rainwater harvesting system? Rainwater collection systems can be as simple as collecting rain in a barrel or as elaborate as harvesting rainwater into large cisterns to supply your entire household. Rainwater storage systems and equipment can be purchased at local home improvement stores, lawn and garden stores, and even ordered online! A great resource for you to use is the Texas Water Development Board's Rainwater Harvesting guide. Just click the link below to download a PDF of that guide. Plus, you might want to read the Tax Exemption information as well. The Trinity Glen Rose District put together a "how to" video for building your own rain barrels. Check it out below. Texas Water Development Board - Rain Water Harvesting - Download Manual HCA Rainwater Harvesting in Central Texas - A Practical Guide TAX EXEMPTION RESOURCES Application for Property Tax Exemption for Water Conservation Initiatives Sales Tax Exemption Form for Purchasing Rainwater Harvesting Equipment TGR Rain Barrel Construction Video Safety First! Safety is always a must when working with power tools. So, we strongly recommend you wear a pair of safety glasses or some sort of eye protection during this project. Where to find an empty barrel: Dave the Barrel Man (www.davethebarrelman.net ); 811 Roosevelt, San Antonio, Tx 78210; Phone: 210-534-5416 Tanks A Lot - 39332 IH 10 West, Boerne, TX 78006; Phone: 830-331-7330; http://www.tanksalottx.com/ Barrels by Joel - Phone: 210-717-6850 https://barrelsforsale.net/ Home Depot/Lowes - small barrels Many on-line resources - Watch out for shipping costs! Tools needed: drill - 3/8 to 1/2 hp Paddle (spade) bit, 15/16" and 2 3/8" hole saw Set of hole saws or a jigsaw to make a 6" hole in the top Materials needed: A ¾” brass faucet (hose bibb) 2” male PVC connectors & electrical Nut Tube of silicone (bathtub) Barrel Step 1 - Drill a hole in the top of the barrel for rainwater to flow into. Mark a spot in the top of the barrel. It doesn’t have to be the middle. Use a 6” hole saw to cut it out. Or using the bottom of a one-gallon plastic pot, mark a circle around the bottom of the pot. Drill a ¼” hole on one side of the circle and saw the circle out. Saw to the outside line you drew with the plastic pot. Step 2 - Drill the overflow hole. Using the pot as a depth gauge, mark and drill the overflow hole just beneath the depth of the pot. Use the 2 3/8” hole saw. Step 3 - Drill a hole for the hose bibb. About 3 inches up from the bottom of the barrel, drill a 15/16” hole for the 3/4” hose bibb. Step 4 - Install the hose bibb. Put a little silicone around the threads on the hose bibb, push down and screw it in. It will be sealed when you finish. Be sure to point the hose bibb to the side for better access. About 3 inches up from the bottom of the barrel, drill a 15/16” hole for the 3/4” hose bibb. Step 5 - Install the overflow. Insert the 2” adapter with the male threads through the hole. Thread the 2” electrical nut on adapter inside of the barrel. Step 6 - Screening out debris. Place mosquito screen in bottom of pot & add rocks (about 2-3 inches deep) and place it in the top of the barrel. This is the filter to keep out the large stuff off the roof. Step 7 - Connect your rain barrel to the downspout. Place your rain barrel in a location where it will capture rain running off of the roof. Or, you can attach a diversion to your existing downspout that will direct water into the barrel. Other Considerations Level your barrel!! Elevating barrels provides room for watering cans and increases gravity flow If linking barrels together, place an overflow pipe on last barrel Pond Pumps and transfer pumps can be used to increase flow Consider placement of faucet if you live in a windy area If you have children, strongly advised to anchor the barrel to your home Connecting two or more barrels together is easy! 1.If you want to hook two or more barrels together, use the overflow hole as the hookup between the barrels. 2.Use a piece of 2” PVC pipe with a male-threaded connector glued to the end and screw it into the female fitting on the inside of the first barrel. Do the same thing on the other end of the pipe and on the next barrel until all the barrels are hooked up. 3.If you do the same setup on the bottom of all the barrels, the water will empty out of all the barrels at the same time. PLUS, you only need one hose bibb in one barrel.

  • TGR VIDEOS | TrinityGlenRoseGCD

    This is the TGR District video page. There are sever videos about water conservation, rain barrel construction and some general information about the District. Trinity Glen Rose District Videos This is the Trinity Glen Rose District video. It gives you an overview of what we do to conserve, preserve and protect the Trinity Aquifer within our district boundaries. TGR Database Training Videos The Trinity Glen Rose District database system is very detailed and deep with various types of helpful information. To make acquiring that information a little easier, we will be producing some training videos on how the public can use the system. The first video below is an overview of how to log into and navigate the system as well as some insights into where the main menus are, how to locate a particular well in the system and then how you can find detailed information about specific wells. Building a Rain Barrell Want to build your own rain barrel? George and Emily give you the rundown on how to get it done using materials you can find at most hardware stores. Watersaving Native Plant Landscape Video Conserving water by converting high water use turf and nonnative plants to low water use native plants is a priority for the Trinity Glen Rose District. Here's one sample of a video we produced to show how great a yard can look with native plants and some great landscape design. You can watch more of these types of landscape videos at the District YouTube page .

  • PREVENTING CONTAMINATION | TrinityGlenRoseGCD

    Looking for water data? You've come to the right place. You can find water well locations and data at this page. Preventing Contamination Materials from many common facilities can contaminate a water well. Take steps to protect your well water from contamination sources. According to Texas law, the wellhead must be at least: 50 feet from any septic tank, cistern, property boundary, and/or non-potable well, 100 feet from your septic drain field or any leach field, 150 feet from any feed storage area, pesticide or fertilizer storage area, or shelter or yard for pets or livestock, and, 250 feet from a manure stack or liquid waste disposal system. Further Reading Texas A&M Agrilife Extension: "Maintain Your Septic System to Protect Well Water " Texas A&M Agrilife Extension: "Protect Your Water Well During Drought " Texas A&M Agrilife Extension: "Well Owner's Guide to Water Supply " National Ground Water Association: "Well Owner Maintenance Practices " Plugging Abandoned Wells Under Texas law, landowners/well owners are responsible for plugging abandoned wells on their property and are liable for any groundwater contamination or injury that results from the wells. Like other wells, an abandoned well is a direct conduit from the ground surface to the aquifer below. Contaminants that enter the well move directly into the aquifer. If a concentrated chemical enters a well, it may move into the aquifer and threaten human health and the environment. It can also put other wells at risk for contamination, particularly those on the same property or those close to the abandoned well. Before you begin the process of plugging an abandoned well, a plugging application must be submitted to the District first for authorization. Please contact the District Office for more information and see our Rules, Forms, & Fees page for the Notice of Intent to Drill, Modify, or Plug. You will need to hire a licensed water well driller or pump installer to seal and plug the abandoned well. Major Flooding Can Contaminate Private Water Wells Large flood events, which the Texas Hill Country is prone to, can contaminate your private water well. However, disinfection can eliminate or reduce harmful bacteria, viruses, or other microorganisms that may be found in your drinking water after flooding in your area. If your well system is damaged, the following instructions for the disinfection process will not work. An indication that your well is damaged can be a decrease in water pressure once turned on. Contact a certified well or pump contractor for examination. It is extremely important to not use contaminated water for: drinking, cooking, making ice, bathing in any form, washing clothes or dishes. After a flood, ingesting or being exposed to contaminated water can cause illness. If you think your well system may be contaminated, some alternative options for safe water include: using bottled water, boiling water for five minutes, using water from a source you know is not contaminated. If your water well was subject to flooding, give the Trinity Glen Rose District a call for assistance in mitigating your flooded well (210-698-1155). Here is an excellent article from the Groundwater Foundation. Groundwater Contamination Article To learn how to disinfect a private water well, click on the red button below for instructions from Texas A&M Agrilife. How to Disinfect a Private Well After Flooding

NEWSLETTER  - sign up to get the most recent news at TGRGCD sent to your email inbox.

Physical: 12274 Bandera Rd, Ste. 106-107
Helotes, Texas 78023

Mailing: PO Box 1589
Helotes, Texas 78023

Phone (210) 698-1155 

Fax (210) 698-1159

Office@tgrgcd.org

©2021 by the Trinity Glen Rose Groundwater Conservation District.

  • Facebook
  • YouTube
bottom of page